Vacuum Filling Cart

Minimum Pressure? Yes, we can do that too!!

Maximator is well known for it’s “Maximum Pressure” strap line, but now the Winsford based Maximator UK team has turned their skills to this vacuum filling and testing unit.

Designed to fill and test sub sea valve actuators under vacuum.

While it seems a long way from the “Maximum Pressure” heritage, it also has two Maximator M Pumps for pressure testing.

Contact us for more information.

Maximator 4 Outlet Gas Booster Station Seals the deal

Maximator 4 outlet gas booster station seals the deal – 

Our customer has 4 labs where they stress their gaskets – at the first step to 20 MPa and then up to 160 MPa.

The test involves load and unload stress levels in increments of 20 MPa each time to a maximum of 160 MPa during which time at each stress stage the test is required to top up back to 160 bar when necessary.

The test is set to run for 3 hours per step using 200bar(g) Grade A Helium.

Maximator were approached to provide a system to feed each of the 4 labs with sufficient gas and maximise the usage of the supply bottles. And this is the result.

Contact us for more information.

#highpressure #gaspressuretest #maximatoruk

LGP – Liquified Gas Pumps

The Liquified Gas Pump Best Practice Guide supports our new range of pumps for liqufied gas aimed at refrigerant applications.

Maximator’s new LGP range of pumps has been released by the global high pressure leader. These pumps are available in a range of sizes and pressures and, for the first time, can be specified with flame arresters, for total flexibility when using flammable compounds.

See the guide here or contact us for more information.

GFS Factory Acceptance Test

New Hydrogen system put through its paces for a prestigious UK customer.

Maximator UK’s Jon Butler was in Germany last week carrying out the factory acceptance test of the new GFS9000 three stage Hydrogen refilling station, before delivery of it to a big customer in the UK. “It’s smooth, quiet and efficient. Just what you would expect from Maximator!”, enthused Butler. “This is next-level: The drive is servo-hydraulic, with inverter drives and it has turned out to be even more efficient than we thought”.

Maximator has versions of the system that run up to 900 Bar and 10kg/hr, with a special version for integrators.

Visit our Hydrogen products here or contact Maximator UK to find out more. #H2compressor #maximator #hydrogennow

Helium Recovery

Maximator Helium recovery systems give short payback time in leak test systems.
 
With the huge expansion in cylinder manufacturing for Hydrogen vehicles, there comes a need for leak detection, and Helium is often used for this.
As effective as it is for leak detection systems, Helium is also extremely expensive.
Maximator Helium recovery systems are able to recover most of the Helium.
 
The helium fills a specially made bag. Once the bag is full, a high pressure helium compressor recovers the costly gas into high pressure storage cylinders ready for re-use.
 
Systems come with laser level monitoring and can be equipped with Helium gas analysers.
 
Contact us at Maximator UK for your Helium recovery needs.
 

Maximator Coning And Threading VFT Toolboxx

The MAXIMATOR VFT-ToolBoXX is a threading and coning tool kit in a handy organiser case. Keep all your coning and threading kit organised and ready for action.
 
The ToolBoXX is available in 3 versions:
 
1. Complete:
Includes tools to cone and thread 1/4“, 3/8“ and 9/16“ Medium, High and Ultra High Pressure tubes
 
2. Medium Pressure:
Includes tools to cone and thread 1/4“, 3/8“ and 9/16“ Medium pressure tubes
 
3. High Pressure:
Includes tools to cone and thread 1/4“, 3/8“ and 9/16“ High and Ultra High Pressure tubes
 
What you get:
Carry case with foam organiser inlays
 
Coning tool, complete
Collet chuck and cutting plate
Threading tool complete and cutting oil
Guide bushings and threading dies
Deburring tool with 2 deburring heads
Step-by-step instructions
L-BoXX tool case in impact-resistant ABS plastic
 
For further information please see 
 
 
Or call 01606 636000
 
#pressure #tubing #maximator #highpressure #toolbox #threading #coning

Automatic Hydrotest Unit

Small but feature packed test unit for API tests.

This compact hydrotest unit from Maximator UK has just been delivered for testing pipeline samples. Whilst it is a compact unit, it packs a punch in terms of specifications within its stainless steel frame.

It is automated with Maximator’s PID hydrotest control system, which includes programmable steps and can set or maintain pressure, vent, wait or loop. It can control ramp rates down to 1 Bar per minute. This makes it suitable for many testing profiles, including API 17B.

Using the built in 7″ VGA colour touch screen, it also includes a data logger which saves test results to a spreadsheet at a user defined sample rate. You can access the spreadsheets from any PC with an ethernet port and cable.

Call us, or email for more details.

#testing #hydrotest #maximator

 

James Full Time For The Summer

First year engineering apprenctice course completed. Congratulations!

James, 17, has completed his first year and is now working with us full time over the summer. “It’s good to have the additional hands at a busy time”, said technician Ricky Wallis. “James has done well in his studies and it’s a good opportunity for him to gain more experience before he goes back to college for his second year”.

Well done, James!

Presenting – Our Newest Recruit

Presenting – our newest recruit…

Angel, 17, created a presentation covering the Global Maximator Group as part of her college studies, which she presented to the college and to her colleagues at Maximator UK.

“Angel has done an impressive job of researching the Maximator global family and was very clear and confident in giving her presentation” commented Jon Butler, MD. “We are very proud of the strong start she has made and the focus she has shown in her studies”.