Pumps

Liquified Gas Pumps

Products, Pumps / By

Maximator’s LGP range of pumps are available in a range of sizes and pressures and can be specified with flame arresters, for total flexibility when using flammable compounds.

The Maximator LGP (Liquified Gas Pump) series was developed for use with refrigerants. The design of these pumps is based on the mode of operation of gas compressors in combination with proven high pressure pump technology. The technology has been optimized for the compression of liquid and gaseous fluids, so that the pumps of the LGP series can compress and convey both aggregate states.

Advantages of Maximator LGP-Series:
• Pressure regulation via manual pressure regulator or pneumatically actuated valve
• Operation with compressed air and design adaptations allows use in explosion-proof areas
• Flame arrester for the use of flammable fluids
• Easy installation and trouble-free handling of pumps
• Low maintenance thanks to reliable, easy-toinstall devices
• Easy handling of occurring phase transitions
• Increased availability through fluid resistant material selection
• Application-optimized technology to avoid icing or phase transitions

Note: On request, our team will undertake the design and advise on the selection. There are special requirements for many applications; advice from experienced Maximator staff is therefore recommended.

Find out more about our Liquified Gas Pumps HERE 

#lgp #liquifiedgaspumps #maximator

MO Series Pumps

Pumps / By

MO pumps are single acting types with single air drive head. They are lightweight, rugged and are available in several pressure ratios, and are predestined for a large number of applications in oil hydraulics.

With cast iron bodies, tool steel plungers and polyurethane seals, all MO pumps come with bottom inlet as standard, with side inlet available as option.
Ideal for portable power packs.

  • single acting
  • single air drive head
  • Pressures to 1,000 bar (14,500 psi)

Great for use in:

• Lifting and clamping: Hydraulic systems for lifting and shifting
loads, lifting tables, aircraft jacking.
• Hydraulic applications: Clamping devices, punching and pin
presses, chucks, actuation of cylinders.
• Presses: cold isostatic presses, filter presses, hydraulic presses,
pressure generation for presses and press overload protection.
• Tooling and Tightening: actuating cropping, crimping, cable
shears and pipe bending tools, roller tensioning and
torque wrenches.
• Testing: tensile test machines and pressure testing.
• Lubrication systems.

Download the Catalogue here
Or view our full range of High Pressure Pumps on our website HERE 

Service For Maximator Pumps And Boosters

Boosters, Pumps, Service / By

Upgraded service facility ready for action.

The Maximator UK Team has been busy updating its service capabilities with an investment in a dedicated service area. Equipped with new air and high pressure gas compressor systems, and with fluid supply and test equipment, our technicians are able to effectively and safely service all Maximator pumps boosters and valves. Maximator technicians will test and verify condition in order to provide costs for service, and will perform final tests and provide service reports.

Available for all Maximator components, including for Oxygen and Hydrogen.
 
Contact us for more information
Contact Us

Vacuum Filling Cart

Pumps, Testing / By

Minimum Pressure? Yes, we can do that too!!

Maximator is well known for it’s “Maximum Pressure” strap line, but now the Winsford based Maximator UK team has turned their skills to this vacuum filling and testing unit.

Designed to fill and test sub sea valve actuators under vacuum.

While it seems a long way from the “Maximum Pressure” heritage, it also has two Maximator M Pumps for pressure testing.

Contact us for more information.

Contact Us

LGP – Liquified Gas Pumps

Products, Pumps / By

The Liquified Gas Pump Best Practice Guide supports our new range of pumps for liqufied gas aimed at refrigerant applications.

Maximator’s new LGP range of pumps has been released by the global high pressure leader. These pumps are available in a range of sizes and pressures and, for the first time, can be specified with flame arresters, for total flexibility when using flammable compounds.

See the guide here or contact us for more information.

LGP Best Practice Guide PDF
Contact Us